Hysol ea9396 data sheet

Hysol ea9396 data sheet

DATA SHEET for additional precautionary, handling and first aid information. Note The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the CASTROL HYSOL T 15 Castrol Hysol T 15 is a high performance chlorine free semi-synthetic metalworking fluid.. It contains a unique additive package that works in synergy to enhance machining performance and surface finish, provide excellent product stability, improve bio-resistance properties and lower the overall operations costs. Technical Data Sheet Hysol® 9464™ May-2006 PRODUCT DESCRIPTION Hysol® 9464™ provides the following product characteristics: Technology Epoxy Chemical Type (Resin) Epoxy Chemical Type (Hardener) Amine Appearance (Resin) White opaque paste Appearance (Hardener) Black opaque paste Appearance (Mixed) Gray opaque paste Viscosity Thixotropic Technical Data Sheet Hysol® 9464™ May-2006 PRODUCT DESCRIPTION Hysol® 9464™ provides the following product characteristics: Technology Epoxy Chemical Type (Resin) Epoxy Chemical Type (Hardener) Amine Appearance (Resin) White opaque paste Appearance (Hardener) Black opaque paste Appearance (Mixed) Gray opaque paste Viscosity Thixotropic

LOCTITE® Hysol® 1C™ can also be fully cured with heat such as; 2 hours at a maximum temperature of 60 °C. 2. After 24 hours, approximately 90% of full cure properties are attained at room temperature. 3. This product can also be cured for 1 hour @ 82°C or 20 to 30 minutes @ 121°C. 4. Heat cures can be modified to achieve a desired degree Technical Data Sheet HYSOL PC18M May-2012 PRODUCT DESCRIPTION HYSOL PC18M provides the following product characteristics: Technology Urethane Appearance Clear amber Product Benefits Reworkable Solvent resistant Room temperature cure Resistance to discoloration Fluorescent under UV light No cracking or crazing with vibration

Hysol XF Semi-synthetic metalworking fluid for machining of low-medium alloyed steel, high alloyed steel, stainless steel, aluminium alloys and cast iron. Semi-synthetic, chlorine free metalworking fluid with selected ep-raw materials for machining of ferrous and aluminium alloys. Product Data Sheet Hysol MB 50 High performance soluble metalworking fluid Description Castrol Hysol TM MB 50 is a high performance soluble metal working fluid, which is chlorine and formaldehyde releasing agent free. It contains a unique additive package that works in synergy to enhance machining performance and surface

Hysol EA 9396.6MD is an easy mixing, two-part syntactic epoxy adhesive with good compressive strength at ... Do not handle or use until the Material Safety Data Sheet ...

Hysol EA 9396 is a low viscosity, room temperature curing adhesive system with excellent strength properties at temperatures from -67°F to 350°F (-55°C to 177°C). product description sheet rocky hill, ct 06067-3910 telephone: (860) 571-5100 1001 trout brook crossing fax: (860) 571-5465 not for product specifications the technical data contained herein are intended as reference only. please contact loctite corporation quality department for assistance and recommendations on specifications for this product. Hysol XF Semi-synthetic metalworking fluid for machining of low-medium alloyed steel, high alloyed steel, stainless steel, aluminium alloys and cast iron. Semi-synthetic, chlorine free metalworking fluid with selected ep-raw materials for machining of ferrous and aluminium alloys.

Hysol EA 9394 is qualified to MMM-A-132 Rev A, Type I, Class 3. The mechanical properties in this data sheet are also valid for Hysol EA 9394S. Hysol EA 9394S is only available in Semkits and differs from Hysol EA 9394 as it has 1 part less thixotrope in the Part B to aid packaging. All other mechanical and handling properties similar. Gluespec makes no warranty or guarantee that the information on our Website, product data sheets, product descriptions, prices or other content is current, accurate, complete, reliable, suitable for a particular purpose or error-free. Consult the relevant manufacturer's website and product data sheet for more information. Hysol EA 9396/C-2 is an elevated curing, low viscosity structural adhesive. ... Do not handle or use until the Material Safety Data Sheet has been read and understood ... product description sheet rocky hill, ct 06067-3910 telephone: (860) 571-5100 1001 trout brook crossing fax: (860) 571-5465 not for product specifications the technical data contained herein are intended as reference only. please contact loctite corporation quality department for assistance and recommendations on specifications for this product.

This material safety data sheet contains changes from the previous version in sections: Corrected information in Section(s) 14. Prepared by: Gary Pierson, Sr. Product Safety and Regulatory Affairs Specialist DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation Technical Process Bulletin LOCTITE EA 9390 AERO Epoxy Paste Adhesive (KNOWN AS Hysol EA 9390) 3 of 4 Service Temperature Service temperature is defined as that temperature at which this adhesive still retains 1000 psi/6.9 MPa using

DATA SHEET for additional precautionary, handling and first aid information. Note The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the For information on product shelf life, please review labels on container or check the Technical Data Sheet. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls: Work should be done in an adequately ventilated area (i.e., ventilation sufficient to maintain concentrations below one half of the PEL and other relevant standards).

Technical Data Sheet FP4451 July-2010 PRODUCT DESCRIPTION FP4451 provides the following product characteristics: Technology Epoxy Appearance Black Product Benefits • High purity • Minimal slumping • Green product Filler Weight, % 72 Cure Heat cure Application Encapsulant - dam Operating Temperature -65 to 150 °C Typical Package Application CASTROL HYSOL T 15 Castrol Hysol T 15 is a high performance chlorine free semi-synthetic metalworking fluid.. It contains a unique additive package that works in synergy to enhance machining performance and surface finish, provide excellent product stability, improve bio-resistance properties and lower the overall operations costs. Product Data Sheet Hysol MB 50 High performance soluble metalworking fluid Description Castrol Hysol TM MB 50 is a high performance soluble metal working fluid, which is chlorine and formaldehyde releasing agent free. It contains a unique additive package that works in synergy to enhance machining performance and surface

technical data sheet rocky hill, ct 06067-3910 telephone: (860) 571-5100 1001 trout brook crossing fax: (860) 571-5465 not for product specifications. the technical data contained herein are intended as reference only. please contact loctite corporation quality department for assistance and recommendations on specifications for this product. Hysol EA 9390 Henkel Corporation Aerospace Group Page 2 of 3 Mix Ratio Part A Part B By Weight 100 56 Pot Life (250 g mass) 2 hours Method - ASTM D2471 in water bath. Application Mixing - Combine Part A and Part B in the correct ratio and mix thoroughly. THIS IS IMPORTANT! Heat buildup during or after mixing is normal.

Hysol® EA 9696 Epoxy Film Adhesive Henkel Corporation Aerospace Group 2850 Willow Pass Road P.O. Box 312 Bay Point, CA 94565 USA 925.458.8000 Fax: 925.458.8030 www.aerospace.henkel.com Description Hysol EA9696 is a modified epoxy film adhesive designed for applications requiring both high toughness and service temperatures to 250°F/121°C. Hysol EA 9396 is a low viscosity, room temperature curing adhesive system with excellent strength properties at temperatures from -67°F to 350°F (-55°C to 177°C). Technical Data Sheet FP4451 July-2010 PRODUCT DESCRIPTION FP4451 provides the following product characteristics: Technology Epoxy Appearance Black Product Benefits • High purity • Minimal slumping • Green product Filler Weight, % 72 Cure Heat cure Application Encapsulant - dam Operating Temperature -65 to 150 °C Typical Package Application THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY. PLEASE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT. Technical Data Sheet Hysol® PC12-007M January 2004 PRODUCT DESCRIPTION Hysol® PC12-007M is a 100 percent solids, general purpose,

Technical Data Sheet HYSOL PC18M May-2012 PRODUCT DESCRIPTION HYSOL PC18M provides the following product characteristics: Technology Urethane Appearance Clear amber Product Benefits Reworkable Solvent resistant Room temperature cure Resistance to discoloration Fluorescent under UV light No cracking or crazing with vibration