Bituthene 3000 sheet membrane

Bituthene 3000 sheet membrane

A. Sheet Membrane Waterproofing: Bituthene® 3000/Low Temperature Membrane by Grace Construction Products; a self-adhesive, cold-applied composite sheet consisting of a thickness of 1.4 mm (0.056”) of rubberized asphalt and 0.1 mm (0.004”) of cross-laminated, high density polyethylene film. Provide Bituthene® 3000/3000 HC High performance waterproofing membrane for sub-structures and flat deck applications Description Bituthene® 3000/3000 HC is a high performance, cold applied, flexible, preformed waterproof membrane combining a special high performance cross-laminated, HDPE carrier film with a unique self-adhesive rubber bitumen compound. The Bituthene membranes are available in rolls, interwound with a disposable silicone treated release sheet. The volatile organic compound (VOC) content of all Bituthene membranes is 0 g/L. Bituthene System 4000 Waterproofing Membrane is a factory made composite with a thickness of 0.060" (1.5 mm) consisting of 0.004" (0.1 mm) of cross ... Apply BITUTHENE 3000 Membrane only in dry weather and at air and surface temperatures of 40 °F (5 °C) and above. ® Apply BITUTHENE Low Temperature Membrane only in dry weather and when air and surface temperatures are between 25 °F (-4 °C) and 60 °F (16 °C). ® Apply BITUTHENE ® Primer WP-3000 in dry weather above 40 °F (5 °C).

Our line of sheet-applied waterproofing membranes are designed to give you the best possible moisture protection. These sheet goods provide continuous, consistent thickness and have been used in projects around the world. These tough membranes feature strong adhesive properties and will bond with most surfaces.

corner strips of Bituthene® 3000/3000 HC placed centrally over the axis of the change of direction. Always apply Bituthene® membrane directly to primed or conditioned structural substrates. Insulation, if used, must be applied over the membrane. Do not apply Bituthene® membranes over lightweight insulating concrete. Supply

MATERIAL SAFETY DATA SHEET Product Name: PREPRUFE®, PREPRUFE® WATERPROOFING MEMBRANES, PREPRUFE® TAPES, PREPRUFE 300LT, PREPRUFE 160LT MSDS ID Number: M-85843 MSDS Date: 10/30/2009 www.graceconstruction.com Page 1 of 5 SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: PREPRUFE®, PREPRUFE® WATERPROOFING A. Sheet Membrane Waterproofing: Bituthene® 3000/Low Temperature Membrane by Grace Construction Products; a self-adhesive, cold-applied composite sheet consisting of a thickness of 1.4 mm (0.056”) of rubberized asphalt and 0.1 mm (0.004”) of cross-laminated, high density polyethylene film. Provide

Bituthene Deck Prep, Bituthene Liquid Membrane Part A MSDS Special Notice: Our database is made up of both MSDS and SDS. Carefully review the (M)SDS below to see if it’s the version you're looking for. Bituthene® 3000/3000 HC High performance waterproofing membrane for sub-structures and flat deck applications Description Bituthene® 3000/3000 HC is a high performance, cold applied, flexible, preformed waterproof membrane combining a special high performance cross-laminated, HDPE carrier film with a unique self-adhesive rubber bitumen compound. Blueskin WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound. Which is integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate providing a high-performance waterproofing barrier. SBS membrane flexible at low ... (12 in.) sheet membrane strip centered on corner. Cover the treated corner with a full sheet of membrane to ensure 2-ply coverage. Insulation Always apply Bituthene membrane directly to primed or conditioned structural substrates. Insulation, if used, must be applied over the membrane. Do not apply Bituthene membranes over lightweight ...

2 Primer B2 / WP-3000 3 Bituthene LM 4 Bituthene Protection Board 5 Hydroduct 220 6 Hydroduct Coil Limitation Bituthene 8000 / 8000 HC Waterproofing Membrane is not intended for permanent exposure. Exposed areas of membrane at upstands, etc., should be covered with Solarshield or similar flashing. Safety and Handling TAMKO ® waterproofing covers the various areas multifamily projects might have, including challenging balcony and breezeway applications. Below-grade and above-grade options help meet your multifamily needs. Bituminous waterproofing systems are designed to protect residential and commercial buildings.Bitumen (asphalt or coal-tar pitch) is a mixed substance made up of organic liquids that are highly sticky, viscous, and waterproof. 1. Bituthene Preformed System - shall consist of Bituthene P-3000 Primer, Bituthene 5000 Membrane, and Bituthene EM-3000 Mastic; all as manufactured by W. R. Grace and Company, Cambridge, Massachusetts. Or 2. Royston Preformed System - shall consis t of Royston Bridge Membrane No. 10-A,

The Bituthene membranes are available in rolls, interwound with a disposable silicone treated release sheet. The volatile organic compound (VOC) content of all Bituthene membranes is 0 g/L. Bituthene System 4000 Waterproofing Membrane is a factory made composite with a thickness of 0.060" (1.5 mm) consisting of 0.004" (0.1 mm) of cross ... Extend Bituthene Liquid Membrane at least 2 1/2 in. (65 mm) onto footing, and 2 1/2 in. (65 mm) onto wall membrane. Option 2: Treat the inside corner by installing a 3/4 in. (20 mm) fillet of Bituthene Liquid Membrane. Apply 12 in. (300 mm) wide strip of sheet membrane centered over fillet. Apr 15, 2012 · Composed of cross-laminated HDPE film and self-adhesive rubber bitumen compound, Bituthene is a family of membrane system for both below ground and above ground application. BITUTHENE® 6000 is ideal for waterproofing structural concrete and civil works such as airports, rapid transit systems, power plants, environmental projects and earth sheltered structures and may be used in lieu of Bituthene 3000 on basements and substructures that require extra tough waterproofing protection. 2 Primer B2 / WP-3000 3 Bituthene LM 4 Bituthene Protection Board 5 Hydroduct 220 6 Hydroduct Coil Limitation Bituthene 8000 / 8000 HC Waterproofing Membrane is not intended for permanent exposure. Exposed areas of membrane at upstands, etc., should be covered with Solarshield or similar flashing. Safety and Handling X-Seal® Membrane is a self-Sealing, self-adhering detail tape designed to work in conjunction with ENVIRO-BARRIER™ system. X-Seal® Membrane provides a durable seal around doors and windows and can be used to seal joints, seams, holes and other undesirable openings in wall systems.

BITUTHENE® 6000 is ideal for waterproofing structural concrete and civil works such as airports, rapid transit systems, power plants, environmental projects and earth sheltered structures and may be used in lieu of Bituthene 3000 on basements and substructures that require extra tough waterproofing protection.

A. Preapplied Sheet Waterproofing Membrane: Bituthene® Preprufe™ 160. 1. Waterproofing Membrane by Grace Construction Products, a threelayer - composite sheet membrane consisting of 0.41 mm (0.016”) of highdensity - polyethylene film, 0.64 mm (0.025”) of specially formulated synthetic adhesive and 0.03 mm (0.001 in.) of protective ...

Bituthene Deck Prep, Bituthene Liquid Membrane Part A MSDS Special Notice: Our database is made up of both MSDS and SDS. Carefully review the (M)SDS below to see if it’s the version you're looking for. TAMKO ® waterproofing covers the various areas multifamily projects might have, including challenging balcony and breezeway applications. Below-grade and above-grade options help meet your multifamily needs.

over 1/16 in. (1.5 mm) wide and all construction and control joints with 9 in. (230 mm) wide sheet membrane strip. Apply BITUTHENE 3000 Membrane only in dry weather and at air and surface temperatures of 40 °F (5 °C) and above. ® Apply BITUTHENE Low Temperature Membrane only in dry weather and when air® and surface Grace Bituthene 3000 Flexible Waterproof Membrane is a high performance, cold applied, flexible, preformed waterproof membrane combining a special high performance cross-laminated, HDPE carrier film with a unique self-adhesive rubber bitumen compound. Intended for waterproofing concrete, masonry and wood surfaces, (12 in.) sheet membrane strip centered on corner. Cover the treated corner with a full sheet of membrane to ensure 2-ply coverage. Insulation Always apply Bituthene membrane directly to primed or conditioned structural substrates. Insulation, if used, must be applied over the membrane. Do not apply Bituthene membranes over lightweight ...

BITUTHENE® 4000/4000S membrane shall be laid by peeling back the protective release paper and applying the adhesive face onto the prepared surface, free from ice, frost, condensation or any contaminants which could adversely effect adhesion. Once the membrane is applied, cover with a protection board as soon as possible. Apply BITUTHENE 3000 Membrane only in dry weather and at air and surface temperatures of 40 °F (5 °C) and above. ® Apply BITUTHENE Low Temperature Membrane only in dry weather and when air and surface temperatures are between 25 °F (-4 °C) and 60 °F (16 °C). ® Apply BITUTHENE ® Primer WP-3000 in dry weather above 40 °F (5 °C). Continuity sealant: Bituthene® LM is a high performance liquid membrane providing waterproof continuity at angles and for detailing terminations at pile caps and pipe penetrations.